Clearwater® Algaecide Remover

ClearWater 1 Litre Algaecide is a highly effective way to eliminate algae and prevent a pool or hot tub from looking murky. Although algae doesn’t do any direct harm to bathers it looks unpleasant and provides an ideal breeding ground for germs and bacteria.  If algae forms on or below the water’s surface you simply pour the recommended dose of algae remover into the water. Ideally the algaecide should be applied where water inlets are situated so that it disperses evenly and effectively throughout the water. The amount of algae treatment used depends on the size of an above ground swimming pool or hot tub and the severity of the situation.  
As with all chemical products, time should be taken carefully read through instructions and warnings. Thankfully ClearWater 1 Litre Algaecide is clearly labelled with all of the necessary guidelines.
Regular application helps to control algae growth
Liquid algaecide prevents build-up of algae
Helps to maintain clean and healthy water
1 litre container of liquid algaecide

How to Use:

1. Measure the Pool or Hot Tub Volume: Before application, determine the volume of water in your pool or hot tub. This will help you calculate the correct dosage of ClearWater Algaecide Remover.
2. Shake the Container: Prior to use, shake the container of algaecide remover well to ensure uniform distribution of the active ingredients.
3. Pour the Recommended Dose: Using the provided measuring cap or a suitable measuring tool, pour the recommended dose of ClearWater Algaecide Remover into the water.
4. Apply Near Water Inlets: For optimal dispersion, apply the algaecide near the water inlets of your pool or hot tub. This allows it to spread evenly throughout the water.
5. Repeat as Necessary: Depending on the severity of the algae growth and the size of your pool or hot tub, you may need to repeat the application as directed on the product label.

Where to Use: ClearWater Algaecide Remover is suitable for use in pools and hot tubs, both above ground and in-ground. It can be used on various surfaces including concrete, fiberglass, vinyl, and tile.

When to Apply:

• Use ClearWater Algaecide Remover as a preventive measure on a regular basis to control algae growth.
• Apply the algaecide when algae is visible on or below the water's surface.
• For best results, apply the algaecide during periods of low sunlight and low bather activity to allow for maximum effectiveness.

Cautions:

1. Read Instructions and Warnings: Before using ClearWater Algaecide Remover, carefully read and follow all instructions and warnings provided on the product label.
2. Avoid Contact with Skin and Eyes: Wear appropriate protective clothing, including gloves and goggles, when handling the algaecide. Avoid contact with skin and eyes, and wash thoroughly with water if contact occurs.
3. Keep Out of Reach of Children and Pets: Store the algaecide securely out of reach of children and pets to prevent accidental ingestion or exposure.
4. Do Not Mix with Other Chemicals: Do not mix ClearWater Algaecide Remover with other chemicals unless specifically instructed to do so by the manufacturer. Mixing chemicals can result in hazardous reactions.
5. Dispose of Properly: Dispose of any unused or expired algaecide according to local regulations. Do not pour it down drains or into waterways.

By following these guidelines, you can effectively use ClearWater Algaecide Remover to maintain a clean and healthy pool or hot tub environment.