Ronseal Wet Rot Wood Hardener penetrates deep binding and hardening decaying wood to provide a solid base for wood filling. The Ronseal Wet Rot Wood Hardener comes in the following
Provides a strong base to begin filling cracks and holes
Soaks in deep and strengthens rotten wood
Repairs rotten wood, creating a solid base
Dry in just 2 hours for quicker repairs
Sets rock hard

How to Use:

Prepare the Wood: Remove any loose or soft rotten wood using a chisel or scraper until you reach solid wood.
Clean the Area: Ensure the surface is clean and free of dust, dirt, or debris for effective absorption.
Apply the Hardener: Using a brush, generously apply Ronseal Wet Rot Wood Hardener to the affected area. Allow the hardener to soak in thoroughly.
Wait to Dry: Let the hardener dry for about 2 hours. Once dry, the wood should be hard and ready for further repairs.
Fill and Finish: Once the hardener is fully set, you can proceed with filling holes and cracks with a suitable wood filler to complete the repair.

Where to Use:

Interior and Exterior Wood: Use on window frames, doors, and structural timber suffering from wet rot.
Damaged Wood Surfaces: Ideal for use on areas where wood has softened or deteriorated due to rot.

When to Apply:

Dry Conditions: Apply in dry weather for optimal results. If used outdoors, ensure there is no rain forecast for at least 2 hours post-application.
Temperature Range: Apply when temperatures are between 10°C and 25°C for best results.

Cautions:

Wear Protective Gear: Use gloves and eye protection when handling to avoid skin and eye contact.
Ventilation: Work in a well-ventilated area, especially indoors, as fumes can be strong.
Avoid Inhalation: Do not inhale the vapors. If you feel unwell, move to fresh air and seek medical advice if necessary.
Keep Away from Children and Pets: Store in a safe place, out of reach.

Ronseal® Wet Rot Wood Hardener 500ml