Polycell Damp Seal Has Been Specially Formulated To Seal Patches Of Penetrating Damp On Interior Walls And Ceilings In Just One Coat, Preventing Them From Showing Through And Spoiling Decorations. Damp Seal Has A Matt White Finish That Can Be Over Painted Or Wallpapered If Required.
Seals Patches Of Penetrating Damp On Interior Walls And Ceilings In Just One Coat.
Prevents Damp From Showing Through And Spoiling Decoration.
Touch Dry In 4 Hours (Depending On Conditions).
For Plaster, Cement And Stone.
Use Indoors.
Size: 500ml.

How to Use:

Surface Preparation: Ensure the area to be treated is clean and dry. Scrape off any loose or flaking paint. If there is mold or mildew, clean it with an appropriate fungicidal wash.
Application: Stir the product thoroughly before use. Use a brush or roller to apply a generous coat over the damp patch, ensuring full coverage.
Drying Time: Leave to dry for at least 4 hours (depending on conditions).
Finishing: Once fully dry, you can over-paint with your chosen emulsion or apply wallpaper if desired.

Where to Use:

Ideal for interior walls and ceilings where penetrating damp is visible.
Suitable for use on plaster, cement, and stone surfaces.
Not recommended for exterior walls or areas that are constantly exposed to moisture.

When to Apply:

Apply when the damp patches are dry to the touch.
Best used during dry and moderate weather conditions to ensure optimal drying time.
Do not apply in very humid conditions, as this could delay drying.

Cautions:

Ventilation: Ensure adequate ventilation when applying indoors.
Temperature: Do not apply if the temperature is below 10°C.
Skin and Eye Protection: Wear protective gloves and avoid contact with eyes and skin. In case of contact, rinse immediately with water.

Polycell® One Coat Damp Seal Paint 500ml & 1L